전체상품목록 바로가기

본문 바로가기

표면저항측정기 152-1

기본 정보
상품명 표면저항측정기 152-1
제조사 TREK
원산지 미국
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
표면저항측정기 152-1 수량증가 수량감소 0 (  0)
총 상품금액(수량) : 0 (0개)

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

이벤트

제품사양
적용사례
기술자료
 

 

Resistance / Volume Meter

Model 152-1

Model 152-1 resistance / Volume METER

The Trek Model 152-1 Resistance/Volume Meter is designed to precisely measure surface or volume resistance on a wide variety of conductive, dissipative, and insulative materials. The Model 152-1 employs a measurement technique which conforms to several ANSI/ESD Association standards for measuring surface resistance, resistivity, and volume resistance including STM2.1 for garments, STM4.1 for work surfaces, STM 7.1 for flooring, STM11.11 for planar materials, STM11.12 for volume resistance [IEC 61340-2-3] and STM11.13 two point resistance measurement. A variety of measuring probe electrode configurations are available for making surface resistance measurements, volume resistance measurements or used for surface resistivity meter calculations.

The Model 152-1 features exceptional measurement accuracy and wide measurement ranges of 103 to 1013 ohms using point-to-point probes or the two-point resistance probe for small surface measurements. The probes are purchased separately. Measured resistance values are clearly displayed on a high-contrast LCD display using scientific notation.

The electrode test voltage for the measurement probe(s) is switch selectable for 10 V or 100 V operation to conform to the individual requirements of the ANSI/ESD Association standards and testing conditions. The selected test voltage is indicated on the LCD display. The Model 152-1 is light-weight and portable, and can be operated from internal batteries or connected to an AC line power source using a battery eliminator.

152-1 Walking Test Adapter

  • The Walking Test Adapter Kit [CN 1K039 ] for the Models 152 Resistance Meter and
    152-1 Resistance/Volume Meter allows analysis of resistance levels on the human body.

    The resistance of a person to ground in an electronic environment can be measured with the Trek Walking Test Adapter. This test provides measurement data of actual resistance on a person in multiple locations. This test ensures ESD safe practices, such as STM 97.1 "Body System to Ground" resistance measurements, are being implemented properly and that proper resistance is being maintained. Contact Factory for more information.

PERFORMANCE

Measurement Range
10 E3 to 10 E13 ohms.

Measurement Accuracy (of reading)
At 25 °C ±10 °C at 20% to 70% Relative Humidity:
Point-to-Point Probes [ Model 152AP-5P]
10 E3 to 10 E12 ohm range,±5% of LCD reading,
10 E13 ohm range,±8% of LCD reading.
Concentric Ring Probe [Model 152P-CR-1] and
Two-Point Resistance Probe [Model 152P-2P]
10 E3 to 10 E11 ohm range, ±5% of LCD reading,
10 E12 to 10 E13 ohm range,±10% of LCD reading.

Probe Electrode Test Voltage
User selectable for 10 V or 100 V, ±2%.

Test Current Limit
Limited to less than 13 mA in the 10 V range and less than 1.7 mA in the 100 V range.

Test probes / accessories

  • Model 152AP-5P Test Probes
    2.27 kg. (5 lb.) (set of two probes) Available for performing resistance measurements including ANSI/ESD-STM4.1 standards (point-to-point or resistance to ground measurements).

    Model 152P-2P Two Point Resistance Probe
    Performs measurements on surface areas too small to be measured with conventional probes.

    Model 152P-CR-1 Surface/Volume Concentric Ring Probe
    Measures surface and volume resistance of materials as per IEC or ESDA standards. A three (3) position switch on the probe selects either SURFACE resistance or VOLUME resistance measurements with either a GUARDED or UNGUARDED outer electrode. Surface / Volume Resistance Measurements

    Resistance Probes, 3mm x 25.4mm
    Set of two miniature probes [CN 17540] can be handheld and randomly positioned.

    Test Plate Set (consists of two separate plates)
    The use of these plates [CN 17530] are described in the ESD STM11.12 and IEC 61340-2-3 standards.
    Conductive Plate
    (5" x 5"/127 mm x 127 mm) A stainless steel conductive plate (with a mini banana plug
    connector).
    Insulative Plate
    (5.4" x 5.4"/ 137 mm x 137 mm) Acts as an insulative surface.

    Walking Test Adapter Kit
    The Walking Test Adapter allows analysis of resistance levels on the human body [STM 97.1]. Contact factory for more information

 

 

PRODUCT FEATURES

  • LCD Display
    Three digits plus two digit exponent (scientific notation).
  • Low Battery Indicator
    LCD message for low battery.
  • Test Voltage Range Indicator
    Indicates the voltage selected either 10 V or 100 V.
  • Automatic Shutoff
    If the unit is left idle for longer than 10 minutes, the unit automatically turns off.

POWER REQUIREMENTS

  • Battery Operation
    Two (2) 9 Volt batteries provide 6 hours of power for portable operation.
  • AC Line Operation
    Use the optional AC to DC adapter. The adapter output connector is a female type 2.1 mm DC power plug for 15-18 V DC at 350 mA.

ACCESSORIES

  • Accessories Supplied
    • Operator's Manual, ground cord, and (2) 9 V batteries.
  • Accessories Available
    • 115 V AC to 15 V DC, AC adapter/eliminator, International AC Adapter kit (90-260 V), and carrying case.
    • Walking Test Adapter Kit [CN 1K039 ]
      for the Model 152-1 Resistance/Volume Meter
    • Test Plate Set [C/N 17530]
      Consisting of a stainless steel plate and an insulative plate for surface and volume resistance measurements.
    • Probes Purchased separately

GENERAL

  • The Model 152-1 Resistance/Volume Meter conforms to the following ANSI/ ESD Association Standards for measuring surface resistance and surface resistivity:

    STM2.1 Garments.
    STM4.1 Work surfaces - resistive characterization.
    STM7.1 Flooring materials.
    STM9.1 Footwear resistive characteristics.
    STM11.11 Surface resistance measurements of
    static dissipative planar materials.
    STM11.12 Measurements for volume resistance
    [IEC 61340-2-3].
    STM12.1 Seating - resistive measurements.
    STM11.13 Two-point resistance measurement.
    STM97.1 Floor materials/footwear - resistance
    measurements in combination with active user.

    Instrument Dimensions
    180 mm H x 100 mm W x 44 mm D
    (7" H x 4" W x 1.75" D)

    Instrument Weight
    Approximately 0.5 kg (1 lb) with batteries.

    Environmental Operating Range
    Temperature
    15 °C to 35 °C.
    Relative Humidity
    5% to 80%, noncondensing.

CERTIFICATION

TREK, INC. certifies that each Model 152-1 is tested and calibrated to specifications using measurement equipment traceable to the National Institute of Standards and Technology or traceable to consensus standards.

All specifications are subject to change.

 


* 전화주문 : 031-704-2401 팩스주문 : 031-704-2421 메일주문 : aaa@a-a.co.kr

  입금계좌 : 국민은행 298737-04-004838  예금주 :아이에스테크주식회사


*카드결제는 홈페이지 상에서 지원되지 않습니다. 카드결제를 이용하실 분들은 031-704-2401로 연락 바랍니다.
 
     

DELIVERY

  • 배송 방법 : 택배 & 화물
  • 배송 지역 : 전국지역
  • 배송 비용 : 4,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 :

    - 배송료 : 10만원 미만시 착불 발송 됩니다.

      배송여건이 어려운 섬지방의 경우와 제품의 무게등 배송상의 문제로 인해 배송비용은 추가 될 수 있습니다.

    - 퀵서비스 요청시 착불 배송이 원칙 입니다.

    - 택배 마감 시간은 오후 4시 입니다.

EXCHANGE INFO

- 물품 파손 및 기능상의 이상이 있을경우 즉시 당사로 연락하여 사고 접수 바랍니다.


- 재고품목의 단순 변심 및 사양변경에 따른 경우 왕복 배송비가 부담 됩니다.


- 수입발주품 및 주문제작품은 반품 및 교환이 원천 불가 하오니 주문시 충분한 사양 검토 바랍니다.

SERVICE INFO

A/S 서비스 신청은 신청서 다운로드 후 내용작성 후 동봉하여 발송 바랍니다.

게시물이 없습니다

글쓰기 목록

게시물이 없습니다

글쓰기 목록

HOME  COMPANY  AGREEMNET  PRIVACY  GUIDE

298737-04-004838

국민은행 / 아이에스테크주식회사

       

저희 쇼핑몰은 KG이니시스를 통해 안전거래를 위해
현금 등으로 결제시 구매안전서비스를 이용하실 수 있습니다